Skip to product information
This harness allows you to relocate the speedometer and tachometer into an aggressive riding position. This will give you full visibility of your instruments at a glance without compromising your sight of the road.
These wire harnesses are custom made for easy plug-n-play installation to match the OEM factory harness but in various lengths to meet your needs.
Use original gauges, gaskets, and hardware. Requires speedo and tach mounting bracket as well as block off plate.
These harnesses are direct plug-n-play from the original tach/speedometer.
Guerrilla Cables 18+ Softail Dual Gauge Relocation Harness
79.95 USD
Guerrilla Cables 18+ Softail Dual Gauge Relocation Harness
This harness allows you to relocate the speedometer and tachometer into an aggressive riding position. This will give you full visibility of your instruments at a glance without compromising your sight of the road.
These wire harnesses are custom made for easy plug-n-play installation to match the OEM factory harness but in various lengths to meet your needs.
18-21 Lowrider & Lowriders S Specs:
Use original gauges, gaskets, and hardware. Requires speedo and tach mounting bracket as well as block off plate.
These harnesses are direct plug-n-play from the original tach/speedometer.
Available lengths:
No cutting or splicing required.
This harness allows you to add a traditional speedometer and tachometer to your Street Bob FXBB or Softail Standard FXST. This will give you full visibility of your instruments at a glance without compromising your sight of the road.
These wire harnesses are custom made for easy plug-n-play installation for a dual gauge setup but in various lengths to meet your needs.
Available lengths:
No cutting or splicing required.
*SOFTAIL STREET BOB (FXBB) 2018-Later
*SOFTAIL STANDARD (FXST) 2020-Later
a.) H-D Part #70900697 (U.S.A Models)
TACH:
a.) H-D Part #70900729 (All Models)
Check us out on YouTube.
- 22"
- 25"
- 28"
No cutting or splicing required.
18-24 Street Bob FXBB & FXST Specs:
This harness allows you to add a traditional speedometer and tachometer to your Street Bob FXBB or Softail Standard FXST. This will give you full visibility of your instruments at a glance without compromising your sight of the road.
These wire harnesses are custom made for easy plug-n-play installation for a dual gauge setup but in various lengths to meet your needs.
Available lengths:
- 22"
- 25"
- 28"
No cutting or splicing required.
*SOFTAIL STREET BOB (FXBB) 2018-Later
*SOFTAIL STANDARD (FXST) 2020-Later
Requires:
- Speedo & Tach Gauges (2018-Later Lowrider Speedo & Tach)
a.) H-D Part #70900697 (U.S.A Models)
TACH:
a.) H-D Part #70900729 (All Models)
- Speedo/Tach mounting bracket
Check us out on YouTube.