Skip to product information
Imzz Elite steel kickstand drop plate for Harley M8 Softail

Imzz Elite M8 Softail Kickstand Drop Plate – 1.5" Extension

94.95

Raised your Softail? Your kickstand didn't get any longer.

Longer shocks, taller forks, and upgraded suspension can completely change the way your M8 Softail rides.

Unfortunately, they can also leave your bike leaning a little farther than you'd like when it's parked.

That's why we made the Imzz Elite M8 Softail Kickstand Drop Plate.

Designed to compensate for taller suspension, this bolt-on plate drops your factory kickstand mounting position by 1.5", helping correct excessive lean without replacing the entire kickstand.

No cutting. No drilling. No need to buy a completely new +1" kickstand.

Just a straightforward solution to a common problem.

And we make them right here in Orange County, California.


Get Your Softail Sitting Right Again

When you increase your motorcycle's ride height, you're also changing the angle at which it sits on the kickstand.

The factory kickstand was designed around the original suspension setup. Once you start adding taller suspension components, that original length may not be enough to keep the bike at a comfortable parked angle.

Our M8 Softail Kickstand Drop Plate lowers the kickstand mounting position by 1.5", effectively providing additional reach to help compensate for those suspension changes.

It's an easy way to address excessive lean without having to replace the kickstand itself.


Bolt-On Installation. No Drilling Required.

One of the biggest advantages of this setup is how straightforward the installation is.

Unlike kickstand extension blocks that require drilling into the kickstand foot, our M8 Softail Drop Plate bolts into place without cutting or drilling.

The kit includes the mounting hardware needed for installation, along with a new kickstand bumper.

Important: We recommend relocating the kickstand bumper to help prevent contact with the primary cover. A replacement bumper is included and we walk through the process in our installation video.

Watch the Imzz Elite Kickstand Drop Plate Installation Video HERE


Heavy-Duty Steel Construction

We build these plates from heavy-duty steel to provide the strength needed for the application and help resist bending.

It's a simple part, but it has an important job to do.

We'd rather build it properly than cut corners on material.


Made in Orange County, California

This isn't just another part we're pulling off a shelf.

The Imzz Elite M8 Softail Kickstand Drop Plate is one of our own products, made right here in Orange County, California.

We developed it as a practical solution for M8 Softail riders who have raised their suspension and need to correct the resulting kickstand lean.

It's the kind of straightforward problem-solving part we like making.


Features

  • Designed to help correct excessive kickstand lean on M8 Softails with taller suspension

  • Lowers the kickstand mounting position by 1.5"

  • Bolt-on installation

  • No cutting or drilling required

  • Heavy-duty steel construction

  • Includes necessary mounting hardware

  • Includes replacement kickstand bumper

  • Installation video available

  • Made in Orange County, California, USA


Fitment & Installation Notes

Designed for compatible Harley-Davidson Milwaukee-Eight Softail models.

This product is intended for bikes that need additional kickstand reach due to increased suspension height.

Before ordering, verify that the plate is compatible with your motorcycle's year, model, and existing kickstand mounting arrangement.

Important Kickstand Bumper Note

We recommend relocating the kickstand bumper to help prevent the kickstand from contacting or scraping the primary cover.

A new bumper is included with the kit.

Please watch the installation video for the recommended bumper relocation procedure.

View Installation Instructions HERE

After installation, confirm proper kickstand movement, retraction, clearance, and parked stability before riding.


Product Specifications

Specification Details
Brand Imzz Elite
Product M8 Softail Kickstand Drop Plate
Application Compatible Harley M8 Softail Models
Kickstand Drop 1.5"
Material Heavy-Duty Steel
Installation Bolt-On
Cutting Required No
Drilling Required No
Mounting Hardware Included
Replacement Bumper Included
Manufacturing Orange County, California, USA

More Parts for Your M8 Softail

Building out your M8 Softail?

We've got more parts for suspension, controls, hardware, and performance upgrades.

Shop More M8 Softail Parts HERE


A Simple Solution for a Common Problem

You raised your Softail for a reason. You shouldn't have to live with an excessive parked lean angle because of it.

The Imzz Elite M8 Softail Kickstand Drop Plate helps bring the kickstand back in line with your suspension setup, without replacing the entire stand or drilling into it.

Made in Orange County. Built from heavy-duty steel. Designed to do its job.

Imzz Elite — working on Harleys since 1996.



Customer install video HERE.

You may also like