ARP Sprocket/Pulley Bolt Kit

(17 customer reviews)

$40.00$50.00

Need to upgrade from the weak factory hardware? Our ARP Sprocket & Pulley bolt kit uses US-Sourced hardware made out of 8740 Chromoly and ARP stainless steel. Our kit comes with 12-point heads so you wont strip your bolt heads when torquing the hardware down. Can be used with any OEM sprocket, pulley, or aftermarket manufacturers chain and pulley kits.

Comes in 2 finishes to choose from: Polished Stainless and Black

Fitment Guide

*This is just a guide. Please take your own measurement prior to ordering to ensure proper length is ordered.

  • 1 3/4″ – 2″: Early Dyna and FXR
  • 2 1/4″: 06-17 Dyna
  • 2 1/2″: M8 Softail

 

Recommended torque specs:

70 ft/lbs done in a cross pattern starting at 20 ft/lbs and working up in 15 lb increments until you reach require torque spec for each bolt. use RED LOCTITE when installing.

Includes:

  • 5 bolts

Bolt heads are flanged and you do not need any additional washers.

Don’t settle for less when it comes to the foundation of your motorcycle. Get the proven products from the biggest names in the industry for quality and strength!

You’ll need to use RED Loctite when installing these bolts. DO NOT use BLUE Loctite!

 

Find more ARP bolts Hardware kits for your Harley HERE.

Description

ARP Bolts Sprocket/Pulley Bolt Kit

Need to upgrade from the weak factory hardware? Our ARP Sprocket & Pulley bolt kit uses US-Sourced hardware made out of 8740 Chromoly and ARP stainless steel. Our kit comes with 12-point heads so you wont strip your bolt heads when torquing the hardware down. Can be used with any OEM sprocket, pulley, or aftermarket manufacturers chain and pulley kits.

Comes in 2 finishes to choose from: Polished Stainless and Black

Fitment Guide

*This is just a guide. Please take your own measurement prior to ordering to ensure proper length is ordered.

  • 1 3/4″ – 2″: Early Dyna and FXR
  • 2 1/4″: 06-17 Dyna
  • 2 1/2″: M8 Softail

 

Recommended torque specs:

70 ft/lbs done in a cross pattern starting at 20 ft/lbs and working up in 15 lb increments until you reach require torque spec for each bolt. use RED LOCTITE when installing.

Includes:

  • 5 bolts

Bolt heads are flanged and you do not need any additional washers.

Don’t settle for less when it comes to the foundation of your motorcycle. Get the proven products from the biggest names in the industry for quality and strength!

You’ll need to use RED Loctite when installing these bolts. DO NOT use BLUE Loctite!

 

Find more ARP bolts Hardware kits for your Harley HERE.

arp hardware for harleys

What is a Black Oxide finish?

Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add corrosion resistance, for appearance and to minimize light reflection. One of its advantages over other coatings is its minimal buildup; the blacking process creates a layer only about a micrometre thick.

Why are my new ARP bolts oily?

That oil keeps them from corroding and keeps them looking new! You’re a biker…you can’t be afraid to get your hands dirty. (If you are, trade your Harley in for  Vespa.) Hot baths of sodium hydroxide, nitrates, and nitrites (at 286 °F) are used to convert the surface of the material into magnetite (Fe3O4).  To achieve maximal corrosion resistance the black oxide must be impregnated with oil or wax. Once the process of dipping is completed the top layer of the fastener is porous and a layer of oil is applied, similar to a pickling process. The oil seeps into the material adding that extra corrosion resistance to rust.

Will they rust?

Black Oxide adds a layer of corrosion and abrasion resistance to fasteners. Like any material, black oxide treated fasteners can rust in the right environments. It will depend on if the fastener is damaged or marred, the type of metal with the black oxide treatment and environmental conditions. In high heat environments, the oil residue that stays on the fasteners will begin to turn brown. Many users find their bolts look like they rust prematurely when really, the oil is just changing colors. See the next Q&A to learn how to bring them back to looking new if they begin to show rust.

Do they require maintenance?

Like any treated, chromed or painted surface, they do require some maintenance. It’s simple and takes only a few minutes! To keep your black oxide hardware looking good and new on your bike, they must be oiled. We recommend spraying WD-40 on a rag and wiping the surface of the hardware whenever you clean your bike. Don’t wait for them to look bad before doing something. A quick swipe with WD-40 every now and then will keep them looking brand new and prevent corrosion. We use Silikroil around the shop which we prefer over WD-40. You can find it on Amazon. In hot, rainy or humid environments, they may require more frequent maintenance.

History & Background on ARP

They say that to be successful you must identify a need and satisfy it. Back the early 1970s, racing enthusiast Gary Holzapfel saw that many of his friends’ broken engines were caused by fastener failure.

At the time, there were no commercially available studs and bolts up to the challenge. So Holzapfel called upon his many years of fastener making experience for a leading aerospace subcontractor and founded ARP (Automotive Racing Products).

In the ensuing years, the firm has grown from what was literally a backyard garage workshop into a highly diversified manufacturer with seven operational entities in Southern California with a combined area in excess of 200,000 square feet. These include forging, heat-treating, machining, quality control finishing and packaging/warehousing facilities in Santa Paula and Ventura, California.

There is even a unique racing-themed restaurant at the main Santa Paula facility – called “ Hozy’s Grill” – which is open to the public.

Today, ARP’s product line contains thousands of part numbers, and has expanded to include virtually every fastener found in an engine and driveline and throughout the suspension and frame. These range from quality high performance OEM replacement parts to exotic specialty hardware for Formula 1, IndyCar, NASCAR and NHRA drag racing and marine applications.

 

Additional information

Weight .25 lbs
Dimensions 4 × 3 × 2 in
Length

1 3/4", 2", 2 1/4", 2 1/2"

Choose Finish

Polished, Black, Gold

17 reviews for ARP Sprocket/Pulley Bolt Kit

  1. Kyle Putnam (verified owner)

    ✊?

  2. brian crocker (verified owner)

    These guys rock! Thanks IMZZ Elite.

  3. Justin B. (verified owner)

    Great product

  4. yiking hernandez (verified owner)

    The bolt are great

  5. Hollace B. (verified owner)

    Can’t say enough about IMZZ! Ordered on a Tuesday night and was at my door on Friday in TN. Great quality, great customer service, will be buying more hardware in the future

  6. Collin (verified owner)

    killer

  7. Bret E. (verified owner)

    Quality products, decent price.

  8. Edward (verified owner)

    Anazing product and customer service cant wait to order more products from you guys, thanks again

  9. Michael (verified owner)

    Nice

  10. Alex Koppen (verified owner)

    Really adds to the finishing touches ????

    Image #1 from Alex Koppen
  11. Carl Fitzwater (verified owner)

    Looks good

  12. Anonymous (verified owner)

    Hardware looks great. Was easy to find on their website and they arrived in good time

  13. Steven Podolec (verified owner)

    Good

  14. Rapo, Mark (verified owner)

    Always helpful get my orders to me ASAP

  15. Craig (verified owner)

    Came in quick thank you guys

  16. Sky (verified owner)

    ARP over everything!

  17. Sam Mills (verified owner)

    Haven’t installed yet.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…