High performance LED front turn signal assembly replaces the OEM turn signal with an aggressive styled housing in a gloss black finish. SAE Selective Yellow faceted lens offers dual intensity yellow running light and full contrast DOT compliant turn signal flash.

Units are equipped with plug and play JAE connector for quick and simple 100% plug and play installation on 2015-2023 Harley-Davidson® Road Glide (FLTRX), Road Glide Special (FLTRXS), 2022-2023 Road Glide ST (FLTRXST) & CVO Road Glide Limited (FLTRKSE), 2020-2024 Road Glide Limited (FLTRK), 2018-2022 CVO Road Glide (FLTRXSE), 2016-2019 Road Glide Ultra (FLTRU), 2020-2022 CVO Road Glide Ultra (FLTRUSE) and 2023-2024 Road Glide 3 (FLTRT).

Features

• High performance LED front turn signal assembly
• Aggressive styled housing in a gloss black finish
• Yellow faceted lens
• Running light and full contrast turn signal flash
• Plug-and-Play replacement for the OEM turn signal

Installation guide HERE.

By law, all headlights and taillights must be DOT compliant for use on roads and highways in all 50 states. Those without DOT compliance are for off-road use only and not legal on US roads and highways. Federal US DOT laws always take precedence over state regulations when both exist.

Custom Dynamics in-house engineering team designs and tests products against DOT and SAE standards to ensure headlights, fog lamps, turn signals, brake lights, etc, all carry compliance. You can identify these by a “DOT” and “SAE” marking in the lens.

SAE: Society of Automotive Engineers set technical standards for the manufacturing, testing and design or automotive lighting. Often, these are incorporated into FMVSS.

FMVSS: Lighting, signaling and reflective devices are regulated by federal law. These are the Federal Motor Vehicle Safety Standards. FMVSS purpose is to reduce traffic accidents, deaths and injuries resulting from traffic accidents.

DOT: The Us Department of Transportation establish and administer the FMVSS. To be DOT compliant, lighting must meet the Section 108 requirements of FMVSS.

Fits:

Off-Road Race style, DOT approved!

Shark Demon 2 Universal LED headlight offers high-performance illumination, specialized for motorcycle on road use. DOT compliant design with unmatched beam pattern and durability.

Low beam projects 3600 raw/2651 effective lumens from three projection-style LEDs. High beam adds four additional direct-reflective LEDs boasting an impressive 9080 raw/4485 effective lumens total. Waterproof with clear polycarbonate lens and gloss black aluminum housing.

Included plug and play universal wire harness provides connection points to OEM wiring, side mount with provided hardware. No bracket included.

Features

• High-performance illumination, specialized for motorcycle on road use
• Low beam projects 3,600 raw/1,382 effective lumens from three projection-style LEDs
• High beam adds four additional direct-reflective LEDs boasting an impressive 9,080 raw/3,216 effective lumens total
• Completely sealed, IP67 waterproof
• Included plug and play universal wire harness provides connection points to OEM wiring
• Universal, 12 VDC systems
• Engineered in the U.S.A.

More Off-Road style headlights HERE.

By law, all headlights and taillights must be DOT compliant for use on roads and highways in all 50 states. Those without DOT compliance are for off-road use only and not legal on US roads and highways. Federal US DOT laws always take precedence over state regulations when both exist.

Custom Dynamics in-house engineering team designs and tests products against DOT and SAE standards to ensure headlights, fog lamps, turn signals, brake lights, etc, all carry compliance. You can identify these by a “DOT” and “SAE” marking in the lens.

SAE: Society of Automotive Engineers set technical standards for the manufacturing, testing and design or automotive lighting. Often, these are incorporated into FMVSS.

FMVSS: Lighting, signaling and reflective devices are regulated by federal law. These are the Federal Motor Vehicle Safety Standards. FMVSS purpose is to reduce traffic accidents, deaths and injuries resulting from traffic accidents.

DOT: The Us Department of Transportation establish and administer the FMVSS. To be DOT compliant, lighting must meet the Section 108 requirements of FMVSS.

Video

Off-Road Race style, DOT approved!

Shark Demon 2 Low Rider ST Headlight Kit offers high-performance illumination, specialized for motorcycle on road use. DOT compliant design with unmatched beam pattern and durability.

Low beam projects 3600 raw/1382 effective lumens from three projection-style LEDs. High beam adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens total.

Plug and play wire harness, and mounting hardware also included for a direct replacement of the OEM headlight.

Features

• High-performance illumination, specialized for motorcycle on road use, with unmatched beam pattern and durability
• Low beam projects 3600 raw lm/1382 effective lm (3 projection LEDS)
• High beam projects 9080 raw lm/3216 effective lm (4 direct-refectibe LEDS)
• Includes 3 mm, 304 stainless steel mounting brackets and mounting hardware
• Single lamp assembly is completely sealed IP67, waterproof
• Plug-and Play
• Engineered in the U.S.A.
• SAE, FMVSS & DOT compliant.

View product data sheet HERE.

More headlights HERE.

By law, all headlights and taillights must be DOT compliant for use on roads and highways in all 50 states. Those without DOT compliance are for off-road use only and not legal on US roads and highways. Federal US DOT laws always take precedence over state regulations when both exist.

Custom Dynamics in-house engineering team designs and tests products against DOT and SAE standards to ensure headlights, fog lamps, turn signals, brake lights, etc, all carry compliance. You can identify these by a “DOT” and “SAE” marking in the lens.

SAE: Society of Automotive Engineers set technical standards for the manufacturing, testing and design or automotive lighting. Often, these are incorporated into FMVSS.

FMVSS: Lighting, signaling and reflective devices are regulated by federal law. These are the Federal Motor Vehicle Safety Standards. FMVSS purpose is to reduce traffic accidents, deaths and injuries resulting from traffic accidents.

DOT: The Us Department of Transportation establish and administer the FMVSS. To be DOT compliant, lighting must meet the Section 108 requirements of FMVSS.

Installation Video

Fits:

Those who know when you got the glow, you need the glow, the glow to grow…

Light up the road with this harness exclusively from Guerrilla Cables.  This harness allows you to install a Baja Designs LP4/LP6 Headlight on a Dyna or M8 Softail for that next level look.  This Guerrilla Cables harness was designed for a cleaner install with a slim profile to carry the appropriate load to the high-power LP4/LP6 headlight.  Includes highly-detailed installation recommendations and diagrams.  100% Plug-n-play.

ITEMS INCLUDED

• Super small, amazingly bright
• White running light and full contrast amber front turn signal
• Engineered in Germany with SMD-LED technology
• Includes mounting brackets and connectors
• Some applications may require the use of a load equalizer.
• Sold in pairs.

Fits:

Video

Replaces headlight covers on FXRP/FXRT and FXRD Fairings.

• Ideal for riders seeking to enhance their motorcycle appearance and performance
• Designed with the perfect blend of style protection and functionality
• The clear lens of the headlight cover maximizes light output
• Allows improved visibility during nighttime rides
• Includes headlight cover, trim and hardware
• Made in USA

Check out our YouTube channel for tons of install videos, product recs and more!

Easy install. NO cutting required! This bracket will allow you to fit an LP6 Baja light into your LowRider ST.

• Utilizes factory mounting holes.
• Hardware included
• Brackets are laser cut steel and powdercoated gloss black
• Made in the USA

*Wiring harness and light NOT included

Check out our YouTube channel for tons of install videos, product recs and more.

• Three high power advanced optical D lenses illuminate as low beam, and high beam adds five additional lights for an incredibly wide, ideal beam pattern with illumination down the road as well as on either side
• Included wire adapter connects to OEM headlight harness with H4 connector on the ProBEAM headlight
• Low beam: 1.7 A @ 12.8 V
• High beam: 2.23 A @ 12.8 V
• 304 stainless steel bracket
• Mounting hardware included
• SAE and DOT compliant
• Made in USA

Fits:

Check out our YouTube channel for tons of install videos, product recs and more.

Baja style headlights for your Roadglide! DOT & SAE compliant. Lifetime Warranty!

Shark Demon LED headlights offer high-performance illumination, specialized for motorcycle on road use.

• Side facing position lights further increase viewing angle and width of beam pattern for ditch-to-ditch illumination
• Low beam projects 11314 raw/5554 effective lumens (6 projection LEDs and 8 direct-reflective LEDs)
• High beam projects 22274 raw/8634 effective lumens (22 direct-reflective LEDs)
• Waterproof: IP67 ingress protection rating
• 3 mm, 304 stainless steel mounting brackets. mounting hardware and wire harness included
• Plug and play
• Mounting hardware included

Video

Fitment Guide

• Double lamps within a completely sealed IP67 waterproof housing provide projection style low beam
• Eight more LEDs utilize a reflective technology to produce a brilliant high beam pattern
• Double-X pattern illuminates as white running light
• Complete LED headlight assembly is a direct plug and play replacement for OEM Road Glide headlight
• High Beam = 1654 lm
• Low Beam = 698 lm
• DOT & ECE compliant
• Lifetime Warranty.

Video

Fitment Guide