• Aggressive profile motocross-style bars
• Slotted for internal wiring
• 3-1/2” on-center knurling
• Made in the U.S.A
• Notched for Throttle-by-Wire
• Available with a laser-etched SlyFox logo

1″ Bars

• Fits any riser with a 1” clamping area
• 29.5″ Wide
• 3.5″ End Rise
• 5.2″ Center Width
• 2″ Pullback

1 1/8″ Bars

• Features a 1-1/8” diameter in the clamping area that tapers to 1” in the grip area
• Works with any 1-1/8” risers and top clamp (find them HERE)
• Accepts heated grips
• 31″ Wide
• 4″ End Rise
• 5.25″ Center Width
• 1.75″ Pullback

Video

• Aggressive profile motocross-style bars
• Brushed stainless steel finish with a laser-etched SlyFox logo
• Slotted for internal wiring
• 3-1/2” on-center knurling
• Fits any riser with a 1” clamping area
• Made in the U.S.A
• Available in Chrome, Black and Stainless Steel

More MX Style Handlebars HERE.

Measurements:

• 29.5″ Wide
• 2.5″ End Rise
• 5.2″ Center Width
• 1.75″ Pullback

Video

Handmade at Imzz Elite in Orange, CA.

• Made from US Sourced DOM tubing
• 1″ diameter bars
• Drilled and slotted for internal wiring
• Gloss Black powdercoated finish

Dimensions:

Width: 32″

Rise: 4″

Pullback: 4″

Diameter: 1″

Features:

• These moto style bars are designed by Forbidden Motorcycles and made by Fly Racing! They feature the moto typical 1-1/8″ clamping area but taper down to 1″ to accommodate stock Harley hand controls
• No need to sleeve them.
• They are pre drilled for internal wiring, including the holes to run wires through the FM risers.
• Bars are 32″ wide, pullback is 3″ and rise is 2.5″

More moto style bars HERE.

Check us out on YouTube.

The Podium V-TWIN MOTO Handlebars are the latest in the development of ODI’s handlebar technology. They’ve created a non-braced performance handlebar that has a moto feel with the strength and durability for your V-Twin.

The Podium V-Twin bar is constructed of a 7075-T6 alloy to provide added strength. Focusing more on aggressive riders looking for the perfect balance between strength and style.  The ODI Podium V-Twin Moto Bars have been vigorously tested in the Performance V-Twin segments.

Harley Moto Bar Features

• 1″ or 1 1/8″ clamp diameter tapers to 1″ at hand controls
• Slotted for Internal Wiring and notched for Harley Davidson & Indian Throttle-by-Wire
• High-strength seamless double-butted alloy
• Shot-peened and hard-anodized black for improved durability
• Knurled clutch side helps with grip bar adhesion
• 31.5″W x 4.75″H
• 2″ Pull back with 3.75″ Rise
• Clamping surface opening: 6.25″

More moto bars HERE.

* 1-1/8″ moto bars are made from 2014-T6 alloy. (Requires “oversized” 1-1/8” handlebar mounts or risers)

* 1″ moto bars are made from 7075-T6 alloy

WILL NOT WORK WITH HARLEY HEATED GRIP SYSTEMS

HANDLEBAR CABLE ROUTING IS NOT DESIGNED FOR FITMENT ON THE FOLLOWING MODELS:

• 2023 FLHXSE, FLTRXSE MODELS
• 2024 FLHX, FLTRX, FLTRXSTSE MODELS

Install video

Our T-Bar Gauge Mount is made to fit perfectly with our Dive Bars and Nudie Bars for relocating your gauges on 18-19 FXBB and FXBR model bikes.

• Made of billet aluminum
• Available in gloss black and chrome finishes
• Perfect for 1.25″ bars (like these and these)

Gauges not included.

Made in the USA!

What better place to kickback than at the nudie bar! We’ve designed the ultimate pullback handlebar for perfect hand placement! Handmade and precision welded in a state of the art fixture ensuring each piece is finished perfectly.

Made in-house, by hand, using US sourced 1 1/4″ 120 wall 4130 Chromoly tubing. 100% TIG welded.

Check out our Dive Bars for a straight T-Bar look.

Features:

• 3.5″ Overall Pullback
• Available in 11″, 13″ and 15″
• Black or Chrome finish
• Works with Throttle By Wire & cable throttle applications
• Setup for internal wiring
• 28″ width

Fits:

• 95 and Newer bikes

Check out Jeff Holt’s review of our bars HERE.

The ultimate handlebar design for perfect hand placement! Handmade and precision welded in a state of the art fixture ensuring each piece is finished perfectly.

Made in-house, by hand, using US sourced 1 1/4″ 120 wall 4130 Chromoly tubing or 304 Stainless Steel tubing. 100% TIG welded

Features:

• Available in 10″, 12″ and 14″
• Black & chrome finishes available
• 1 1/4″ tubing
• 100% TIG welded
• Works with Cable & Throttle By Wire bikes
• Setup for internal wiring (can also be run externally if you aren’t feeling it!)
• 28″ width

Looking for a pullback bar? Check out our Nudie Bars HERE.

Fits:

• 95 and Newer bikes

Lifetime Warranty

Check out our install video HERE.

• 1 inch Diameter Bar fits stock Harley Mounts and Controls
• Drilled and Slotted for Internal Wiring
• Knurled for maximum clamp grip
• Fly By Wire Key Holes allow newer style bike fitment
• Laser Etched THRASHIN® Logo
• Made in U.S.A.
• Rise 5.5″
• width 30″
• Pull Back 4″

• 1 inch Diameter Bar fits stock Harley Mounts and Controls
• Drilled and Slotted for Internal Wiring
• Knurled for maximum clamp grip
• Fly By Wire Key Holes allow newer style bike fitment
• Laser Etched THRASHIN Logo
• Made in U.S.A.
• Rise 4″
• Width 30″
• Pullback 5″

2024+ Fitment: 

Softail: FLFB/FLHC/FXBB/FXBR/FXLRS/FXLRST

Road Glide: FLTRX/FLTRXSE/FLTRXSTSE

Easily pair our THRASHIN Risers and Handlebars directly to the stock bushing location without any cutting of the nacelle.

Street Glide: FLHX/FLHXSE

For Street Glide Models you will need to use our Street Glide Adapter Plate, paired with our Thrashin Risers and Handlebars.

Please note that on “24 Street Glide Models you will lose functionality of the storage drawer within the fairing.