Bagger Turn Signal Eliminator Kit Features

Note: Fits early model narrow style and current model wide style rear fenders. Mount will overlap fender edge on narrow style rear fenders when installed.  

Does Not Fit 2010-2022 Street Glide CVO (FLHXSE), 2009-2022 Road Glide CVO (FLTRXSE), 2013-2014 Road King CVO (FLHRSE) or 2014-2022 HD Touring models with rear turn signals built into the Tour-Pak.

Signal Stabilizer  (sold separately) required when rear turn signals are removed on Harley Davidson Touring models to ensure proper turn signal function and flash speed.

• 45 super bright dual intensity red LEDs on each side illuminate to function as additional running & brake lights
• Units adhere to each side of the rear fender fascia with double sided tape
• Chip-on-board LED technology
• Includes a plug and play wire harness for a simple install

Units adhere to each side of the rear fender fascia with double sided adhesive and include a plug and play wire harness for a simple installation. Offered with dual intensity red LED’s (function dependent upon year/model).

14+ = Run, Brake & Red Turn

10-13 = Run & Brake Light

More Performance Bagger Lighting HERE.

Fitment Guide:

14+ Touring fits:

2010-2013 Touring fits:

Video

Kodlin fender strut turn signal adapter tabs are designed to cover the holes left after removal of the stock fender strut-mounted turn signals. They are compatible with all Kodlin LED indicators or any aftermarket lights with M8 or 5/16″ mounting studs.

• CNC machined from billet aluminum
• Available in chrome or black finish
• Sold in pairs
• CNC machined from billet aluminum
• Covers the two holes (1 round, 1 oval) left after removal of the stock fender strut-mounted turn signals
• Compatible with all Kodlin LED indicators or any aftermarket lights with 8 mm mounting studs
• Older Sportster, Dyna and Softail models may require minor modifications to the strut to fit.

More fender turn signal products HERE.

Fitment Guide

Check us out on YouTube. 

This curved license plate mount is the solution for cleaning up the rear of your bike. Featuring Cycle Visions Slick Signal with built in run/break light, turn signals, and license plate light.

Features

• Mount features tough black powder-coated or chrome steel construction
• Kit also includes cover plates to fill the hole left when removing stock turn signals.
• Lights are not DOT compliant
• Fits 7″ x 4″ US Motorcycle License Plates
• Slick Signal frame has built-in LED run, turn, brake and turn lights

More license plate and integrated turn signal options HERE.

Fitment Guide

2018+ StreetBob & 2018+ Softail Slim fits:

2018+ Sport Glide fits:

2018+ FatBob fits:

NOTE: After installation, some 2016 and newer models may have rapid flash of the turn signals. In this case, a simple (and often times FREE) brake light re-flash at your local Harley Dealership will be required to regain normal turn signal function. It only takes a couple minutes.

Installation Video

This curved license plate mount is the solution for cleaning up the rear of your Sporty. Featuring Cycle Visions Slick Signal with built in run/break light, turn signals, and license plate light.

Features

• Features tough black powdercoated 10g steel construction
• Available with Slick Signal license plate frame with LED run, turn, brake and plate light
• Lights are not DOT compliant
• Fits 7″ x 4″ US Motorcycle License Plates

NOTE: Lights must be hardwired.

Fits

Video

Strut lights fit over the top of the stock struts, totally cleaning up and transforming your stock bike without sacrificing function or safety.

CNC machined aluminum housing with super bright LED’s in an injection molded polycarbonate lens.

• CNC-machined aluminum housing with injection-molded polycarbonate lenses and dual-function LEDs
• Feature a 70° visual range and are about 60% brighter than most single-function LEDs on the market
• May require the use of a load equalizer to function properly
• Dual-function amber/red LEDs w/ 70° viewing angle
• Functions as brake and turn signals
• Sold in pairs
• Made in the USA in Southern California
• Not DOT or ECE compliant

More turn signal options HERE.

Fitment Guide

18-20 FXBB or FLSL fits:

18-20 Breakout fits: 

18-20 Heritage & Deluxe fits:

18-20 Lowrider/ & Lowrider S or SportGlide fits:

Check us out on YouTube.

Our M8 Softail full fender conversion is the first to hit the market!

RWD one piece full rear fender is stamped out of 14 gauge steel and laser trimmed for accuracy, allowing you to bolt it directly onto your M8 Softail StreetBob. Made in the USA right here in Southern California.

Includes:

• Rear Fender (7.5″)
• Taillight base with circuit board
• Integrated Turn Signals Smoked Taillight
• License Plate Frame (standard US size: 7″ x 4″)
• Wiring Harness

Some models may require a “flash” at your local Harley dealer for the taillight to function properly. They will need to flash the bikes computer so it thinks it’s a Lowrider with a full length fender. Most dealerships will perform this service for no cost as it only takes a few minutes. 

****Our harness plugs into the OE harness. It will not function properly with any integration modules, load equalizer modules, etc.

Why choose Imzz Elite full fenders over others?

We are the first and only company to offer a complete Dyna rear fender conversion! Complete with wiring harness, license plate mount and frame & integrated taillight all-in-one. The quality and craftmanship is second to none.  If you try to piece together everything you need from Harley direct, you’ll end up spending hundreds more. Also, the quality can’t compare to what we offer. When choosing our full fender kit, you’ve eliminated all that leg work, making your life a hell of a lot easier!

Install Video

Premium Light Pipe Design For Run & Brake

Premium Light Pipe Design For Run & Brake

This curved license plate mount is the solution for cleaning up the rear of your Dyna. Featuring Cycle Visions Slick Signal with built in run/break light, turn signals, and license plate light.

Features

• Available in chrome or black
• Kit also includes cover plates to fill the hole left when removing stock turn signals.
• Lights are not DOT compliant
• Fits 7″ x 4″ US Motorcycle License Plates

Fits

13-17 FXDB

10-17 FXDWG

NOTE: After installation, some 2016 and newer models may have rapid flash of the turn signals. In this case, a simple (and FREE) flash at your local Harley Dealership will be required to regain normal turn signal function. It only takes a couple minutes.

Video