Our much loved fender conversion kit is now available for your Performance Bagger!

Using FXR Division’s rear sport fender, integrated taillight with harness and a laydown license plate frame to clean up that rear end.

The rear fender is stamped from .080 steel and laser cut for easy, direct bolt-on installation. The low profile allows you to show off your Performance Suspension, Swingarm, Wheels and Brakes and more!

Available in raw steel finish or painted to match your bike. (Contact us for colors not listed in the drop-down choices.)

When you choose our precision colormatching option, your fender will arrive fully assembled and ready to bolt on. All you’ll have to do is bolt it on, plug it in and you’re ready to ride! There is no additional charge for assembly with this option. We spend a great deal of time on these fenders in the paint shop. From the prep to the sanding and polishing, as a result, you’ll get a killer full fender that stands out in the crowd.

Includes:

• Fender (raw or colormatched)
• Taillight base with circuit board
• Integrated Turn Signals Smoked Taillight
• License Plate Frame (standard US size: 7″ x 4″)
• Wiring Harness

Fits:

• 2014 & Newer Baggers

Why choose Imzz Elite full fenders over others?

We are the first and only company to offer a complete rear fender conversion! The quality and craftmanship is second to none. We spend a great deal of time painting and assembling these fenders and the work shows when you see it arrives at your door. Other fenders on the market are offered in a powdercoated finish. Factory tins are never powdercoated. They WILL NOT match the rest of your bike. Our full fenders conversions are color matched using our state-of-the-art precision color technology using all BASF paint materials. If you try to piece together everything you need from Harley direct, you’ll end up spending hundreds more and you’ll still have to put it together. Also, the quality can’t compare to what we offer. When choosing our full fender kit, you are eliminated all that leg work and making your life a hell of a lot easier!

Check out our YouTube Channel for tons of install videos, product recs and more!

• 100% hand crafted
• Gloss rear fender includes seat docking kit
• Weighs 2.287 (Factory fender weighs 9.71 lbs)
• Proudly made in the USA

More Performance Bagger Parts HERE.

Video

Install video

A great looking addition to your performance Bagger.

• Pre-Preg 3K Full Twill Carbon Fiber
• Aerospace Grade / Mil Spec
• Vacuum Bagged
• Autoclave Cured
• Made in the USA

Available in gloss & matte finish.

Check out more carbon fiber parts from Slyfox HERE.

Fitment Guide

Video HERE.

Check out more Performance Bagger parts HERE.

FXR Division designed their Bagger rear sport fender, keeping those clean OEM lines in mind.

Features

• Stamped from .080 steel and precision laser cut for direct bolt-on ease and seamless finish

• Greatest fender for ground clearance

• Low profile allows you to show off your Performance Suspension, Swingarm, Wheels and Brakes…etc

• Taillight cut out to run a Low-Profile Taillight and Low Profile Lay Down License Plate Mount (purchased separately)

100% Designed & Made in the USA

**You will need a Guerrilla Cables Rear Fender Harness if you are running an integrated taillight option on 14+ models.

Check us out on YouTube. 

• 14-gauge steel construction
• Fender mounting holes are pre-drilled, strut mounts, taillight and license mount are not pre-drilled
• Direct bolt-on design
• Easy to paint
• Made in the U.S.A.

Dimensions:

Length: 32-3/4″ / 83 CM (32-3/4″) / 83 CM

Width: 7″ / 18 CM (7″) / 18 CM

Fits:

Check us out on YouTube.

Our M8 Softail full fender conversion is the first to hit the market!

RWD one piece full rear fender is stamped out of 14 gauge steel and laser trimmed for accuracy, allowing you to bolt it directly onto your M8 Softail StreetBob. Made in the USA right here in Southern California.

Includes:

• Rear Fender (7.5″)
• Taillight base with circuit board
• Integrated Turn Signals Smoked Taillight
• License Plate Frame (standard US size: 7″ x 4″)
• Wiring Harness

Some models may require a “flash” at your local Harley dealer for the taillight to function properly. They will need to flash the bikes computer so it thinks it’s a Lowrider with a full length fender. Most dealerships will perform this service for no cost as it only takes a few minutes. 

****Our harness plugs into the OE harness. It will not function properly with any integration modules, load equalizer modules, etc.

Why choose Imzz Elite full fenders over others?

We are the first and only company to offer a complete Dyna rear fender conversion! Complete with wiring harness, license plate mount and frame & integrated taillight all-in-one. The quality and craftmanship is second to none.  If you try to piece together everything you need from Harley direct, you’ll end up spending hundreds more. Also, the quality can’t compare to what we offer. When choosing our full fender kit, you’ve eliminated all that leg work, making your life a hell of a lot easier!

Install Video

This one piece RWD replacement full rear fender is stamped out of 14 gauge steel and laser trimmed for accuracy, allowing you to bolt it directly onto your 18+ Street Bob. Wiring tubes are welded in and it requires very minimal prep time which makes painting easy.

Made in the USA right here in Southern California.

• One piece stamped 14-gauge steel construction
• Laser-trimmed for a precise fit with minimal pain prep
• Welded wire tube for clean wire installation
• Pre-drilled mounting holes & license plate frame mounting holes
• Pre-trimmed for taillight
• Accepts stock Dyna taillight (or low-profile taillight)
• 7-1/2″ W, 35″ L
• Made in the U.S.A.

This is for the fender only. For the full fender conversion with plate frame, taillight and harness, click here.

Fits:

Install video

One piece RWD rear fender stamped out of 14 gauge steel. Laser trimmed for accuracy, this rear fender bolts directly onto your 92-17 Dyna. Wiring tubes are welded in and it requires very minimal prep time which makes painting easy.

• One piece, stamped 14-gauge steel construction
• Laser-trimmed for a precise fit with minimal paint prep
• Welded wire tube for clean wire installation
• Fender mount and license plate bracket holes are predrilled
• Fender also has taillight cutout for traditional taillight mounting
• Made in the U.S.A.
• Fender can be fitted on Dyna models that do not have fender-mounted taillight and license plate mount, but will require the separate purchase of a fender-mounted taillight and plate mount

Be sure to checkout our YouTube channel for tons of install videos, products recs and more.

*06-17 fenders are 8.5″ wide

*92-05 fenders are 7.5″ wide

Fitment Guide

8.5″ fits:

7.5″ fits: