Integrated fender strut turn signals.

• Amazingly small and super bright 3-1 (Run-Turn-Brake) rear indicator lights
• Engineered in Germany with SMD-LED technology
• Die-cast housing with 8 mm (M8) thread
• Tinted glass with 0.4″ (11 mm) diameter

Fitment Info:

• Direct fit on most M8 Softails
• Some applications may require the use of a load equalizer.
• Older Sportsters, Dynas and Softails may require minor modifications to strut to fit.

Mini fender strut turn signals fit:

• 18+ M8 Softails
• 2002-2017 Dyna models
• 2002+ Sportster models

Check out other fender strut light options HERE.

Video

Custom Dynamics® LED low-profile taillight offers 45 dual intensity red LEDs with a Red or Smoked lens and optional top license plate illumination window. A new spherical internal lens design magnifies the light output to produce a bright red running and brake light with DOT/SAE compliance and increased side visibility. Their most compact design yet protrudes only two inches from the stock taillight baseplate for a sleek, modern taillight solution for the rear fender.

Replacement gasket and nylon washers included for a simple plug and play installation into OEM taillight circuit board for most 1999-2021 Harley-Davidson® models equipped with an OEM Squareback Taillight.

Features

• 45 dual intensity red LEDs behind a spherical lens design to produce a bright red running and brake light
• The low profile design protrudes only two inches from the stock taillight baseplate
• Replacement gasket and nylon washers included for easy plug and play installation into OEM taillight circuit board
• DOT/SAE compliant
• ’22-’24 Low Rider ST (FXLRST) and ’22 Low Rider El Diablo (FXRST) require wiring adapter part # TL-LRST-ADPT (sold separately) for installation.

Video

Fitment Guide

This low profile LED Taillight features high quality LED chips & integrated turn signals.

Features:

• Plug N Play for 99+ HD models
• Integrated turn signals
• License plate window LED light
• 12V DC with 60LEDs
• Lifespan: over 30,000 hours
• Includes gasket to prevent water leakage

Wire functions:

Running = White Wire

Brake = Red Wire

Turn Signal = Yellow wire (right turning) Blue wire (left turning)

Black wire = Negative

**2018+ Softail models will need a new taillight wiring harness for the integrated taillight function to work.

Check us out on YouTube. 

Premium Light Pipe Design For Run & Brake

Premium Light Pipe Design For Run & Brake

This curved license plate mount is the solution for cleaning up the rear of your Dyna. Featuring Cycle Visions Slick Signal with built in run/break light, turn signals, and license plate light.

Features

• Available in chrome or black
• Kit also includes cover plates to fill the hole left when removing stock turn signals.
• Lights are not DOT compliant
• Fits 7″ x 4″ US Motorcycle License Plates

Fits

13-17 FXDB

10-17 FXDWG

NOTE: After installation, some 2016 and newer models may have rapid flash of the turn signals. In this case, a simple (and FREE) flash at your local Harley Dealership will be required to regain normal turn signal function. It only takes a couple minutes.

Video

Perfect base for installing our Low Profile Integrated Taillight.

This base includes the circuit board for plugging in your wiring harness.

• ’22-’24 Low Rider ST (FXLRST) and ’22 Low Rider El Diablo (FXRST) models require OEM rear turn signals to be removed for installation.

Includes:

• Taillight base
• Circuit Board

Fitment Guide

Check us out on YouTube.

• Direct Replacement Base Plate for Harley OEM #68296-99A
• Standard Harley Davidson Squareback Taillight Base Plate.
• Available in Chrome and Black.
• Also available with circuit board.

• License plate frame with six bright-white license plate LEDs
• Flushmount run, brake and turn signal LEDs
• 45 super-bright, flush-mount, dual-intensity red running/brake LEDs
• 20 super-bright, flush-mount, amber turn signal LEDs per side
• Frame dimensions: 71/4​” L x 41/4​” W
• Mounting holes center-to-center: 53/4​” x 23/16​”
• Available in flat and radius styles; radius has a 12° curve
• Available in black or chrome finishes
• Mounting hardware included.
• Will require base plate for mounting.

Video

Low profile aluminum horizontal license plate frame with 6 white LEDs built in for license plate illumination.

• Low-profile, sleek design
• Illuminated with six bright-white LEDs
• Measure 7-3/16​” L x 4-1/4​” W
• Mounting holes, center-to-center: 5-3/4​” x 2-3/16​”
• Available in black and chrome finishes
• Mounting hardware included

Mounting base not included.

Standard Frame

Low profile aluminum LED License plate frame with 6 white LEDs built in for license plate illumination. Lifetime warranty against LED failure. Available in Chrome or Black finish. Mounting hardware included. Dimensions: 7-3/16″ L x 4-1/4″ W. Mounting holes, center to center: 5-3/4″ x 2-13/16″.

Radius Frame

Low profile aluminum radius (12 degree curvature) horizontal license plate frame with 6 white LEDs built in for license plate illumination. Lifetime warranty against LED failure. Available in Chrome or Black finish. Mounting hardware included. 36″ wire leads. Dimensions: 7-3/16″ L x 4-1/4″ W. Mounting holes, center to center: 5-3/4″ x 2-13/16″.

Be sure to check us out on YouTube.