• Machined from 6061 billet aluminum
• Slim grip for comfort
• For 1” bars
• Made in the USA

Fitment guide

Fuck Off knurled grips for Harley Davidson and custom motorcycles. Has the wording “Fuck” on the throttle side facing forward, and “Off” on the left side facing forward. Works on throttle cable models 84-UP (EXCEPT 08-UP dressers and other models with throttle by wire, WILL NOT WORK ON ELECTRONIC THROTTLE BY WIRE MODELS). Completely 3d CNC machined from billet aluminum. (2) 6/32 stainless set screws hold the left grip in place. Will work with single or dual cable setups with 1″ bars or 1″ grip area.  Available in OG Gold anodized.  MADE IN THE U.S.A.!

FXR Division handlebars give you great looks, performance, and comfort. All bars go through a rigorous quality control process before leaving the shop. They are also some of the easiest handlebars to internally wire!

Features:

• Work with cable and throttle by wire bikes
• 29.5″ width from end to end
• 12 degree wrist angle (hours of R&D have proven this to be the most natural and comfortable wrist position
• 1″ overall pullback
• Made from 1.250 x .125 steel tubing with double stacked .750 DOM cross supports to add strength and structural integrity
• Gloss black powderedcoated finish
• Proudly made in the USA

*12” bars DO NOT require extending cables and/or lines on most models.

More handlebars HERE.

Handlebar Installation Video

FXR Division handlebars give you great looks, performance, and comfort. All bars go through a rigorous quality control process before leaving the shop. They are also some of the easiest handlebars to internally wire!

Features:

• Work with cable and throttle by wire bikes
• 28.5″ width from end to end
• 12 degree wrist angle (hours of R&D have proven this to be the most natural and comfortable wrist position
• 1″ overall pullback
• Made from 1.250 x .125 steel tubing with double stacked .750 DOM cross supports to add strength and structural integrity
• Gloss black powderedcoated finish
• Proudly made in the USA

*12” bars DO NOT require extending cables and/or lines on most models.

More handlebars HERE.

Video

• Fits 1″ Handlebars
• For Harley Davidson Throttle By Wire Models
• Knurled surface for grip adhesion
• Made out of 6061-T6 billet aluminum
• Dual low friction PTFE inserts for smooth operation
• Compatible with Thrashin Bolt & Moto Grips as well as most aftermarket 1″ grips
• Throttle tube grip area is 4.5″ long

More Throttle Tubes HERE.

Fitment Guide

TBW up to 2023 fits:

2023 CVO and 2024+ Touring fits: 

Check us out on YouTube.

The Speedway Perch Clamps are an evolution from the original Thrashin Perch clamps. With these, they wanted to push the envelope and showcase their machining abilities. They’ve accomplished this by doing more intricate ball-end work, resulting in a more sleek design. These come paired with stainless ARP hardware.

• CNC machined of 6061-T6 Aluminum
• Comes in a pair left and right
• Comes with 12-point ARP hardware
• Made in The U.S.A
• For use with 1″ handlebars.

Fits:

• Dyna, FXR, Softail, and Pre 2024 Street & Road Glides(with aftermarket bars), & Sportster (2009 and up) 

Check them out in action!

Planning on laying down some rubber and wheelieing the entire interstate? Don’t think twice without adding some extra burliness to your V-TWIN Moto Bars!  The ODI V-TWIN MOTO Crossbar is now available for all who want to ride your Dyna or Softail like a Motocross Bike!  Developed to add strength and stiffness to the V-TWIN Moto Bars.

PRODUCT FEATURES:

• Crossbar and Crossbar Mounts with Hard-Anodized Black Gloss finish
• Improves strength on open style handlebar during stunting or wheelies.
• Tapered Teflon Sleeves create a perfect fit onto the ODI V-Twin Moto Bar
• Hard-Anodized Gloss finish with subtle ODI logo
• 11-1/2″ long
• For use with 1″ or 1-1/8″ to 1″ tapered ODI V-Twin Moto bars.
• NOTE:  Designed to fit ODI MOTO Handlebars.  Not tested with other models.

AVAILABLE COLORS:  Gloss BLACK or Polished SILVER

FITMENTS:  ODI V-TWIN MOTO Bar 1″ or 1-1/8″ to 1″ Tapered Bar

LENGTH:  11.5″ / 295mm 

Video

• Slim profile designed with V-Twin motorcycles in mind
• Durable proprietary compound
• Fully textured grip reduces vibration & provides extra dexterity
• Fits standard 1″ Harley handlebar controls
• Available in black
• Sold in pairs

Need a new throttle tube? Find them HERE.

Be sure to check out our YouTube Channel for tons of install videos, product recs and more.

Eliminate the slop of your risers with this solid bushing kit from Thrashin Supply.

This kit includes two black bushing, & two silver bushing. Allowing you to choose which color you want to see whenever you look down.

Features

• Uses stock hardware or our ARP Riser Bolt Kit
• Sold in set of four
• Made in the U.S.A.
• Eliminate the slop of your risers with this solid bushing kit
• Includes two black bushings and two silver bushings, allowing you to choose which color you want to see whenever you look down

More riser bushing options HERE.

Be sure to check out our YouTube Channel for tons of install videos, product recs and more.

Fitment Guide

Dyna/FXR fits:

M8 Softail/Bagger fits:

• Slim profile designed with V-Twin motorcycles in mind
• Durable proprietary compound
• Fully textured grip reduces vibration & provides extra dexterity
• Fits standard 1″ Harley handlebar controls
• Available in black
• Sold in pairs

Need a new throttle tube? Find them HERE.

Be sure to check out our YouTube Channel for tons of install videos, product recs and more.